Cisco 300 Series Administration Manual page 519

24
481
EGP
- —Exterior Gateway Protocol
IGP
- —Interior Gateway Protocol
UDP
- —User Datagram Protocol
HMP
- —Host Mapping Protocol
RDP
- —Reliable Datagram Protocol.
IDPR
- —Inter-Domain Policy Routing Protocol
IPV6
- —IPv6 over IPv4 tunneling
IPV6:ROUT
-
through a gateway
IPV6:FRAG
-
Header
IDRP
- —Inter-Domain Routing Protocol
RSVP
- —ReSerVation Protocol
AH
- —Authentication Header
IPV6:ICMP
-
EIGRP
- —Enhanced Interior Gateway Routing Protocol
OSPF
- —Open Shortest Path First
IPIP
- —IP in IP
PIM
- —Protocol Independent Multicast
L2TP
- —Layer 2 Tunneling Protocol
ISIS
- —IGP-specific protocol
• Protocol ID to Match—Instead of selecting the name, enter the protocol ID.
• Source IP Address—Select Any if all source address are acceptable or
User defined to enter a source address or range of source addresses.
• Source IP Address Value—Enter the IP address to which the source IP
address is to be matched.
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
—Matches packets belonging to the IPv6 over IPv4 route
—Matches packets belonging to the IPv6 over IPv4 Fragment
—Internet Control Message Protocol
Access Control
IPv4-based ACLs