Cisco 300 Series Administration Manual page 243

13
STEP 1
STEP 2
218
• Configuring Voice VLAN Properties
• Displaying Auto Voice VLAN Settings
• Configuring Telephony OUI
Configuring Voice VLAN Properties
Use the Voice VLAN Properties page for the following:
• View how voice VLAN is currently configured.
• Configure the VLAN ID of the Voice VLAN.
• Configure voice VLAN QoS settings.
• Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
• Configure how Auto Voice VLAN is triggered.
To view and configure Voice VLAN properties:
Click VLAN Management > Voice VLAN > Properties.
• The voice VLAN settings configured on the device are displayed in the Voice
VLAN Settings (Administrative Status) block.
• The voice VLAN settings that are actually being applied to the voice VLAN
deployment are displayed in the Voice VLAN Settings (Operational Status)
block.
Enter values for the following fields:
• Voice VLAN ID—Enter the VLAN that is to be the Voice VLAN.
Changes in the voice VLAN ID, CoS/802. 1 p, and/or DSCP cause the
NOTE
device to advertise the administrative voice VLAN as a static voice VLAN. If
Auto Voice VLAN Activation
the option
selected, then the default values need to be maintained.
• CoS/802.1p —Select a CoS/802. 1 p value that to be used by LLDP-MED as
a voice network policy. Refer to
MED Network Policy
• DSCP—Selection of DSCP values that to be used by the LLDP-MED as a
voice network policy. Refer to
MED Network Policy
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
triggered by external Voice VLAN is
Administration > Discovery > LLDP > LLDP
for additional details.
Administration > Discovery > LLDP > LLDP
for additional details.
VLAN Management
Voice VLAN