Light Beplaeement; Oven Door - Maytag CHE9830BCB Repair Manual

Light Replacement Oven Door
Before replacing the oven or panel light bulb, To Bemove: Open the door to tile "stop" position
disconnect power to range. Be sure the bulb and (opened about 6 inches) and grasp the door with both
range parts are cool. Do not touch a hot bulb with a hands at each side. Do not use the door handle to
damp cloth as the bulb may break, lift the door. Lift up evenly until the door clears tile
hinge arms.
To Replace Panel Light
(select models)
Grasp the top trim of the back panel with your thumbs
under the front edge and pull outward while lifting the
trim. Remove the bulb and replace it with an 18 watt
fluorescent tube. Snap the top trim back into place and
restore the powen Reset the eloek.
To Replace Oven Light
Carefully nnscrew the lens cover with a dry potholder.
Very caretully remove the bulb with the potholder.
Replace with a 40 watt appliance bulb. Reconnect the
power to the range and reset the clock.
ii!iii!iii
To Beplaee: Grasp the door at each side, align the slots
i_iii!ilil
in the door with the hinge arms and slide the door down
onto the hinge arms until it is eompletely seated on the
hinges.
Do not attempt to open or close the door until the door
is completely seated on the hinge arms. Never turn the
oven on unless the door is properly in place. When
baking, be sure the door is completely closed. Baking
results will be affected if the door is not securely closed.
PAGE 19