Clutch cable adjustment
1.
Set the handlebar height in the center position (see page
2.
Place the tiller on a level surface and remove the two screw bolts
from front cover, and remove the front cover (equipped type).
3.
The clutch spring should extend 0.08
the main clutch lever is moved from the DISENGAGED position to
the ENGAGED position.
4.
If the spring extension length is incorrect, loosen the lock nut and
turn the adjusting nut in or out just enough to extend the spring. Do
not overtighten.
36
ADJUSTING NUT
LOCK NUT
SCREW BOLTS
±
0.02 in (2.0
CLUTCH SPRING END
23
).
FRONT COVER
±
0.5 mm) when
0.08
±
0.02 in
(2.0
±
0.5 mm)