Verify Status Of Isdn Services - Cisco BTS 10200 Troubleshooting Manual

Class-independent softswitch
Hide thumbs Also See for BTS 10200:
Table of Contents

Advertisement

Chapter 1
ISDN Provisioning

Verify Status of ISDN Services

This procedure verifies that the MGW, MGW terminations, trunks, ISDN D-channels and trunk groups
are in service. When the system reports that both the administrative and operational states are in service,
it means that ISDN signaling is enabled in the network served by this Cisco BTS 10200 Softswitch. If
the system reports any administrative or operational states as out of service (OOS), or not functioning,
follow the specified troubleshooting steps in the
Security Guidelines" section on page vi
For a description of all administrative and operational states reported by the status command, see the
Note
Cisco BTS 10200 Softswitch Operations Manual.
Verify MGW Status
Perform the following steps to verify the MGW status:
Check the MGW status.
Step 1
status mgw id=mgw-isdn;
Reply : Success:
MGW ID -> mgw-isdn
RESULT -> ADM configure result in success
REASON -> ADM executed successful
ADMIN STATE -> ADMIN_INS
OPER STATE -> Media gateway in working status
Step 2
If the administrative state is ADMIN_INS and the operational state is working status, the CA-to-MGW
connection is functioning properly. Proceed to the
Otherwise, stop and perform troubleshooting in accordance with the
Obtaining Support, and Security Guidelines" section on page
Verify D-Channel Status
Perform the following steps to verify the D-channel status:
Verify the D-channel status.
Step 1
status isdn-dchan id=100; dchan-type=PRIMARY;
If the administrative state is ADMIN_INS and the operational state is in-service, then signaling is
Step 2
functioning properly on this D-channel. Proceed to the
page
Otherwise, stop and perform troubleshooting in accordance with the
Obtaining Support, and Security Guidelines" section on page
OL-12436-02
1-12.
"Obtaining Documentation, Obtaining Support, and
to correct the problem.
"Verify D-Channel Status" section on page
vi.
"Verify Trunk Group Status" section on
vi.
Cisco BTS 10200 Softswitch ISDN Provisioning and Troubleshooting
Cisco BTS 10200 Provisioning
1-11.
"Obtaining Documentation,
"Obtaining Documentation,
1-11

Advertisement

Table of Contents
loading

Table of Contents