GE Masoneilan 4700P Maintenance Manual page 39

Pneumatic and electropneumatic positioners
Table of Contents

Advertisement

Special Conditions for Safe Use (denoted by X
after the certificate number)
For type n (Ex nL, nA protection concept):
Special Conditions for Safe Use
© 2015 General Electric Company. All rights reserved
Ex ia IIIC Da T90 °C
Sira 02ATEX4279X
II 3 G
Ex nA nL IIC T4 Gc
.
T
= -40 °C to +80 °C, P
a
This enclosure is made from light
metal which could cause ignition
due to impact. This shall be taken
into consideration when the appa-
ratus is installed in locations that
specifically require Equipment Pro-
tection Levels Ga or Da.
If the Model 4000 I/P Converter is
mounted with the axis of the plastic
baffle in the vertical position with
the baffle uppermost, the required
ingress protection against water is
invalidated; therefore, it shall only
be installed in this orientation if its
location provides protection against
falling water.
T
= -40 °C to +80 °C
a
Provisions shall be made externally
to limit the supply transients from
exceeding 40% of the rated input
voltage (30 V).
If the Model 4000 I/P Converter is
mounted with the axis of the plastic
baffle in the vertical position with
the baffle uppermost, the required
ingress protection against water is
invalidated; therefore, it shall only
be installed in this orientation if its
location provides protection against
falling water.
The installer shall ensure that the
Model 4000 I/P Converter is
installed in a location where there is
a low risk of mechanical impact to
the plastic baffle.
Masoneilan 4700P/E & 4800P/E Positioners Manual =| 39
= 1.1 W
i

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Masoneilan 4800pMasoneilan 4800eMasoneilan 4700e

Table of Contents