Hazardous Area Installations
The positioner is available in versions suitable for use in hazardous areas. The labeling on the po-
sitioner indicates correct areas of use.
WARNING
© 2015 General Electric Company. All rights reserved
Figure 12 Electrical Connections
Installation of any hazardous area equipment must be made in
accordance with the appropriate hazardous area installation
codes and the manufacturer's installation and operating
instructions. You must make no changes or attempt any repairs of
a certified instrument since this invalidates the certified design. If
a certified instrument should fail it must be returned to the
manufacturer for repair.
Maximum pressure 150 PSI.
.
Masoneilan 4700P/E & 4800P/E Positioners Manual =| 35