Configure Wpa-Enterprise (Ap Mode) - D-Link DAP-1525 User Manual

Section 4 - Wireless Security

Configure WPA-Enterprise (AP Mode)

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please
establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption
due to the added overhead.
1. Log into the web-based configuration by opening a web browserand
entering the IP address of the access point (192.168.0.50). Click
Setup and then Wireless Settings on the left side.
2. Select Enable WPA/WPA2 Wireless Security (enhanced) from
the Security Mode drop-down menu.
3. 3. Select Auto(TKIP/AES), TKIP, or AES from the Cipher Type
drop-down menu. If you have wireless clients that use both types,
use TKIP/AES.
4. Select EAP from the PSK / EAP drop-down menu.
5. Enter the IP Address of your RADIUS server in the RADIUS Server IP Address field.
6. Enter the port you are using with your RADIUS server in the Port field.
7. Enter the security key in the Shared Secret field.
8. Click Save Settings to save your settings. If you are configuring the Access Point with a wireless adapter, you will
lose connectivity until you enable WPA-Enterprise (RADIUS) on your adapter and enter the same passphrase as
you did on the Access Point.
D-Link DAP-1525 User Manual 59