Access Point Mode Settings - D-Link DAP-1950 User Manual

Ac1900 high performance mesh wi-fi range extender

Hide thumbs Also See for DAP-1950:

Table of Contents

Section 3 - Configuration

Access Point Mode Settings

This page lets you configure the settings to use the DAP-1950 as an access point. Connect an Ethernet cable from your router's LAN

port to the LAN port at the bottom of the DAP-1950.

To access this page, click the Settings drop-down menu at the top of the page, and select Extender. Click Save to apply the settings

and return to the home page.

Under Existing Network, choose Ethernet to utilize the DAP-1950 as an access point. Refer to "Extender Settings" on page 28 for

more information regarding configuration options.

YourRouter

D-Link DAP-1950 User Manual

Table of Contents