Cisco TelePresence MX800 Installation Manual page 9
Single monitor with single/dual camera
on a free standing floor stand or a floor stand secured to the wall
Hide thumbs
Also See for TelePresence MX800:
- Replacement manual (47 pages) ,
- Installation manual (30 pages) ,
- Spare parts (24 pages)
Advertisement
Installation guide for Cisco TelePresence MX800 - Floor stand
4
Lift monitor onto floor stand
D
90 kg / 200 lb
Make sure that the screw
1
with wing nut enters the
center slot on both sides.
Do not let go of the monitor
before it is securely placed
on the floor stand.
78-100219-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
4
Rear view
Page 9
Rear view
Tighten the wing nuts
2
on both sides. They are
accessed from the sides
of the monitor.
http://www.cisco.com/go/mx-docs
Advertisement
