Makita BO5040 Instructions Manual page 6

matter from the pad. Then peel off the backing paper from the
CAUTION:
stick it onto the pad for further use.
Installing dust bag
1. Dust bag
Install the dust bag on the tool so that the Makita logo
on the dust bag will be upright (not upside down).
Emptying dust bag
1
1. Dust nozzle
-
1
6 ENGLISH
When the dust bag is about half full, switch off and
unlocking the dust nozzle by turning it slightly counter-
clockwise. Empty the dust bag by tapping it lightly.
1
1. Dust nozzle
After emptying the dust bag, install the dust nozzle on
the dust bag. Turn the dust nozzle slightly clockwise to
lock it in place. Then install the dust bag on the tool as
described in "Installing dust bag".
Installing paper dust bag
1
3
1. 2.
paper dust bag
Place the paper dust bag on the paper dust bag holder
dust bag holder.
1
1. Claws 2. Upper part
2
3. Front side of
-
2