Specifications - Makita BO5040 Instructions Manual

SPECIFICATIONS

Orbits per minute (min
Dimensions (L x W x H)
without notice.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
their life must be collected separately and
recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
ing to EN62841:
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
mined according to EN62841:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model
Paper size
-1
)
Net weight
Safety class
) : 81 dB (A)
pA
) : 92 dB (A)
WA
2
) : 3.5 m/s
h
2
BO5040
125 mm
12,000
218 mm x 123 mm x 153 mm
1.4 kg
/II
NOTE:
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
may also be used in a preliminary assessment of
exposure.
WARNING:
use of the power tool can differ from the declared
tool is used.
WARNING:
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
General power tool safety warnings
WARNING:
with this power tool. Failure to follow all instructions
-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
-
Work area safety
1. Keep work area clean and well lit. Cluttered or
2.
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
2 ENGLISH
BO5041
125 mm
4,000 - 12,000
218 mm x 123 mm x 153 mm
1.4 kg
Be sure to identify safety measures
Read all safety warnings, instruc-
/II
-
-