Safety Tips; Product Description - Buffalo APBCD277 Instruction Manual

Meat slicer
Table of Contents

Advertisement

Safety Tips

T
HE
USED BY TRAINED PERSONNEL IN ACCORDANCE WITH THESE INSTRUCTIONS
Position on a flat, stable surface.
A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
Always stand BEHIND the safety guard when operating the appliance.
DO NOT place hands near the blade when in use. This can result in severe injury.
DO NOT touch the blade edge.
DO NOT remove food from the appliance until the blade has come to a complete stop.
DO NOT immerse the appliance in water.
DO NOT attempt to cut bones or items that have been frozen below -6°C. This can damage the blade.
Always switch off and disconnect the power supply to the appliance when not in use.
NEVER leave the appliance unattended when in use.
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified
technician in order to avoid a hazard.
This appliance must only be used in accordance with these instructions and by persons competent to
do so.
This appliance is not suitable for use by children.

Product Description

CD277-A - 220mm blade
CD278-A - 250mm blade
CD279-A - 300mm blade
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.
1
M
S
EAT
LICER IS A DANGEROUS APPLIANCE AND MUST ONLY BE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apbcd279Apbcd278

Table of Contents