Dhcp Server; Dynamic Pool Settings - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless
stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2660 is capable of acting as a DHCP
server.
Function Enable/ Dynamic Host Configuration Protocol (DHCP)
Disable:
assigns dynamic IP addresses to devices on
the network. This protocol simplifies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-2660 to function
as a DHCP server.
IP Assigned From:
Input the first IP address available for assignment
on your network.
The Range of Pool (1- Enter the number of IP addresses available for
254):
assignment. IP addresses are increments of the IP
address specified in the "IP Assigned From" field.
Subnet Mask: All devices in the network must have the same
subnet mask to communicate. Enter the subnet
mask for the network here.
Gateway:
Enter the IP address of the gateway on the network.
WINS:
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer that has a dynamically assigned IP address.
DNS:
Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as www.
dlink.com into IP addresses.
Domain Name:
Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.)
Lease Time:
The lease time is the period of time before the DHCP server will assign new IP addresses.

DHCP Server

Dynamic Pool Settings

73