Dhcp Server; Dynamic Pool Settings - D-Link DAP-2310 User Manual

5GEVKQP   %QP IWTCVKQP
6JG &*%2 CFFTGUU RQQN FG PGU VJG TCPIG QH VJG +2 CFFTGUU VJCV ECP DG CUUKIPGF VQ UVCVKQPU KP VJG PGVYQTM # &[PCOKE
Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network,
the DAP-2310 is capable of acting as a DHCP server.
&[PCOKE *QUV %QP IWTCVKQP 2TQVQEQN &*%2
Function Enable/
assigns dynamic IP addresses to devices on
Disable:
VJG PGVYQTM 6JKU RTQVQEQN UKORNK GU PGVYQTM
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-2310 to function
as a DHCP server.
+PRWV VJG TUV +2 CFFTGUU CXCKNCDNG HQT CUUKIPOGPV
IP Assigned
on your network.
From:
The Range of
Enter the number of IP addresses available for
Pool (1-254):
assignment. IP addresses are increments of the
+2 CFFTGUU URGEK GF KP VJG +2 #UUKIPGF (TQO
GNF
Subnet Mask:
All devices in the network must have the
same subnet mask to communicate. Enter the
submask for the network here.
Gateway:
Enter the IP address of the gateway on the
network.
WINS:
5RGEKH[ VJG 9KPFQYU +PVGTPGV 0COKPI 5GTXKEG 9+05 UGTXGT CFFTGUU HQT VJG YKTGNGUU PGVYQTM 9+05 KU C U[UVGO VJCV
determines the IP address of a network computer that has a dynamically assigned IP address.
D-Link DAP-2310 User Manual

DHCP Server

Dynamic Pool Settings

44