Filling The Water Tank; Receiving Water From The Water Dispenser - Kenwood KSBSDB15 Installation Instructions Manual

filling the water tank

Turn the small cap anticlockwise then remove it from the water tank. Fill drinking water into the
water tank.
• Do not fill above the level, otherwise, it may
overflow.
• Before filling with water, ensure that the water
tank is steady and in a correct position.
• Apart from drinking water, other beverages
(such as milk, juice, carbonated beverage,
etc) are not suggested to be used, especially
beverages that include grain must not be used
(may result in blockage and damage).
• Hot water must not be filled into the water
tank directly.
• Do not touch other parts of the unit when
filling water, it may lead to leakage.

receiving water from the water dispenser

• You should use the type of container that can fit
under the water dispenser. Place the container
properly underneath and push on the lever for water
to flow.
• Before you dispense the water, make sure the lock
device is at "Unlock" position.
• Ensure to slide to "Lock" position after each
use to prevent children from playing with the
lever.
• When at "Lock" position, do not push on
the lever with force. It will damage the
mechanism.
11