Cisco WVC54GCA User Manual page 20

Chapter 2
Maximum time frame
Recording This is the maximum length of time the Utility
will record when motion is detected. (To configure the
Motion Detection settings, click Motion Detection on the
main menu.) The default is 1 min. To change the default,
select the maximum length of time you want from the
drop-down menu.
Maximum time frame for Instant Recording
maximum length of time the Utility will record when you
click the Instant Recording icon on the viewing window
of a Camera. The default is 10 min. To change the default,
select the maximum length of time you want from the
drop-down menu.
Disk Allocation for Recording
You can designate how much hard disk space you want to
use for recording.
Total Space This is the total amount of space available on
the hard drive of the PC running this Utility.
Total Space and Available Space
space available for recording.
Enable Disk space limit If you want to limit the amount
of disk space available for recording, click the checkbox.
Enter the maximum number of megabytes in the Maximum
field.
Of the total amount of disk space available for recording,
you can designate the amount of space available for
motion detection recordings. Enter the maximum number
of megabytes in the Motion Detection Recording Space
field.
Of the total amount of disk space available for recording,
you can designate the amount of space available for
instant and scheduled recordings, enter the maximum
number of megabytes in the Instant/Scheduled Recording
Space field.
If the hard drive runs out of space, the Utility has two
options: it can overwrite the oldest files or stop recording.
Select the option you want, Overwrite oldest file or Stop
recording.
Start Info
You can designate when and how you want the Utility to
launch.
Launch Viewer & Recorder utility on Windows startup
you want the Utility to launch when Windows starts up,
click the checkbox.
Auto start video streaming when utility starts
want video to automatically begin streaming when the
Utility launches, click the checkbox.
After you have made your changes, click Save to save the
new settings.
Wireless-G Internet Home Monitoring Camera
for Motion Detection
This is the
This is the amount of
If
If you
Installing and Using the Camera Utility
To cancel your changes, click Cancel.
To close this screen, click X in the upper-right corner.
To set up the Linksys SoloLink Service, go to "Chapter 3:
Setting up the Linksys SoloLink DDNS Service."
If you want to use the Camera's Web-based Utility, go
to "Chapter 4: Advanced Configuration with the Web-
Based Utility."
19