Table of Contents
Advertisement
Chapter 2
Camera Name
This is the name you gave to the Camera.
MAC Name
Displayed here is the MAC address of the
Camera.
Description
This is the information about the Camera
that you entered.
Address
Shown here is the Camera's IP address.
Port Number
This is the port number the Camera uses
for communication.
Login
If you set up the Camera with a name and password,
then you will need to enter them here in order to access
the Camera.
Name
Enter the login Name.
Password
Enter the login Password.
To add a Camera to the Utility's list, select the Camera you
wish to add by clicking its name in the Cameras on LAN
box. Then click the Add button. You will be notified when
the Camera has been added. Click the OK button.
To close this screen, click the X button in the upper right-
hand corner.
Internet
The Internet screen shows the Camera found on the
t
Internet, along with the Camera's status information.
Main > Add Camera > Internet
Test Results
First, go to the Camera Data section. Enter the Camera's IP
Address, Port Number, and login information (if required).
Then click the Connect button to find the Camera. The
following information will be displayed:
Camera Data
Camera Name
This is the name you gave to the Camera.
Wireless-G Internet Home Monitoring Camera
K
Installing and Using the Camera Utility
MAC Name
Displayed here is the MAC address of the
Camera.
Description
This is the information about the Camera
that you entered.
Address
Shown here is the Camera's IP address or
SoloLink DDNS address.
Port Number
This is the port number the Camera uses
for communication.
Login
If you set up the Camera with a name and password,
then you will need to enter them here in order to access
the Camera.
Name
Enter the login Name.
Password
Enter the login Password.
To add the Camera to the Utility's list, click the Add button.
If you wish to clear a Camera, click the Clear button.
To close this screen, click the X button in the upper right-
hand corner.
View Video
The Camera Status section lists all the Cameras detected
by the Utility. To view a specific Camera's video, select it
from the list and drag-and-drop it on a Channel (viewing)
window.
Double-click the Camera's viewing window to bring up
the View Video screen. This screen displays the selected
Camera's video at full size, and provides icons that you
can use to record, play, stop, take pictures, zoom, adjust
the audio, or double the window's size. These icons are
described below.
To close the View VIdeo screen, click X in the upper right-
hand corner.
Main > View Video
14
Advertisement
Table of Contents
