4
3
1. Holder bolt 2. Holes in the application tool
3. Adapter 4.
When using application tools with a different type of
installation section, use a correct adapter (optional
accessory).
OPERATION
WARNING:
keep your hand and face away from the applica-
tion tool.
CAUTION:
housing. Do not touch the metal part.
may cause a motor lock and stop the tool.
Cutting, sawing and scraping
CAUTION:
(e.g. towards either side) of tool application with
no cutting edge. It may damage the tool.
Put the application tool on the workpiece.
And then move the tool forward so that the application
tool movement does not slow down.
NOTE:
1
2
Sanding
Apply a sanding paper on the workpiece.
NOTE:
7 ENGLISH
preset the orbital stroke rate 3 - 5.
straight line.
CAUTION:
metal to sand wood.
paper without grit.
mendable to determine a correct orbital stroke
rate suitable for your work.
sanding the whole workpiece is completed.
Replacing a sanding paper with different grit
-