Set Calendar And Clock (H3) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
26
Action
"Access"
Scroll to menu H3.
"A"
Settings done
"A"
"Return"
Rev: -

Set calendar and clock (H3)

When required, the clock can be corrected, so that the "time stamps"
for fire alarms, faults, etc. will be correct.
The way the date is presented could be different for different
languages.
NOTE! The RTC component has no built-in battery, i.e. if EBL128 is
out of power (no mains and no battery backup) and after new software
has been downloaded, the date, day of the week and the time have to
be set when EBL128 is powered-up again.
NOTE! The information shown in the display will be saved when
you press "A".
Press "Return" instead of "A" to return to menu H3 without any
changes.
Text in display
Set calendar and clock
Date: 20YY-MM-DD
Weekday:1 (1=Monday, 7=Sunday)
NOTE! The date is in some conventions / languages shown
as DD-MM-YYYY.
YY=Year
MM=Month
DD=Date
hh=hour
mm=minute
ss=second
Date and time was set.
Date: 20YY-MM-DD
Set calendar and clock
EBL128 Operating Instructions V2.0.x
ACCEPT? H3
Time: hh:mm:ss
Time: hh:mm:ss Day D
ACCEPT? H3
99
Comments
According to chapter
"Access", see page 81.
The time shown is the time
when "A" was pressed (in
menu H3).
When required, edit the
date, time and/or weekday.
Press "A". The "clock"
starts again from the date,
time, etc. shown in the
display.
NOTE! Press "Return"
(instead of "A") to return
to menu H3 if no changes
are to be done.
Depending on if "A" or
"Return" is pressed.
Scroll or press "Return".