Error Indicators - Casio CT-X800 User Manual

Reference

Error Indicators

Display Cause
Err Limit You are attempting to record more than 999
measures.
Err Mem Full You are attempting a recording that exceeds the
allowable per song limit.
Err DataFull You are attempting to record more than five songs.
Err No Media 1. The USB flash drive is not connected to the Digital
Keyboard's USB flash drive port.
2. The USB flash drive was removed while some
operation was in progress.
3. The USB flash drive is write-protected.
4. The USB flash drive has anti-virus software.
Err No File There is no loadable file or no playable file in the
"MUSICDAT" folder.
Err No Data You are attempting to save user data when there is no
data to save.
Err ReadOnly A read-only file with the same name you are trying to
use is already stored on USB flash drive.
Err MediaFul There is not enough space available on the USB flash
drive.
Err ManyFile There are too many files on the USB flash drive.
Err NotSMF01 You are attempting to play back SMF Format 2 song
data.
Err Large Sz 1. The SMF file on the USB flash drive cannot be
played because it is too big.
2. The data you are trying to import cannot be
imported because it is too big.
Err WrongDat 1. The USB flash drive data is corrupted.
2. USB flash drive contains data that is not supported
by this Digital Keyboard.
Err Format 1. The USB flash drive format is not compatible with
this Digital Keyboard.
2. The USB flash drive is corrupted.
EN-58
Action
Make your recordings up to 999 measures long.
Keep song recordings with the allowable per song
limit.
Delete some of the songs in memory.
1. Correctly plug the USB flash drive into the USB
flash drive port.
2. Do not remove the USB flash drive while any
operation is in progress.
3. Unprotect the USB flash drive.
4. Use a USB flash drive that does not have anti-virus
software.
Move the file you want to load or play into the
appropriate location (page EN-50) in the "MUSICDAT"
folder.
Select a user data item for which there is data to save.
• Change the name and then save the new data.
• Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
• Use a different USB flash drive.
Delete some of the files on the USB flash drive to
make room for new data (page EN-51) or use a
different USB flash drive.
Delete some of the files on the USB flash drive to
make room for new data.
This Digital Keyboard supports playback of SMF
Format 0 or Format 1 only.
1. The Digital Keyboard supports playback of SMF
files up to 320 KB.
2. The Digital Keyboard supports import of data (per
item) up to the maximum sizes shown below.
Rhythms: Approximately 64 KB
—
1. Format the USB flash drive on the Digital
Keyboard.
2. Use a different USB flash drive.