Manuald - GE S768DAV User Manual

S768DAV – S7768DAV User Manual
M D
2.3.1
ANUAL ATA
To set the data format for channels 1 and 2, see Figure 2, Figure 3, Table 2 and perform the following.
Select a data format for each Data channel on the transmitter using DATA SELECT switch SW1
1)
(channel 1) and SW2 (channel 2).
Select a data format for each Data channel on the receiver using DATA SELECT switch SW1
2)
(channel 1) and SW2 (channel 2).
NOTE: The DATA SELECT switches, SW1 and SW2 on the audio/data card, are shipped in the Auto Configure setting (position 0).
SW3
Figure 2. S768DAV Location of Switches
11-0768DAV-B/ December 2003
S
ELECTION
SW1 SW7
SW8 SW2
Figure 3. DATA SELECT Switches SW1 and SW2
SW5 SW4 SW6
Module Setup
9