Built -Int; Ermination - GE S768DAV User Manual

Manual title
Table 11. J2/J3 Connections for RS485 2-Wire Data
SW1 / SW2 – Position 6 (standard offset)
Position 7 (1V offset)
Position 8 (2V offset)
Pin Signal
1 GROUND/SHIELD
2 NO CONNECTION
3 NO CONNECTION
4 +5 VDC BIAS OUT
5 RS485 -
6 RS485 +
7 TERMINATION – TIE TO PIN 5
8 GROUND
Table 13. J2/J3 Connections for SensorNet Data
SW1 / SW2 – Position 6
Pin Signal
1 GROUND/SHIELD
2 NO CONNECTION
3 NO CONNECTION
4 +5 VDC BIAS OUT
5 SENSORNET -
6 SENSORNET +
7 TERMINATION – TIE TO PIN 5
8 GROUND
B -I T
3.3.3 UILT N

ERMINATION

The S768DAV features a built-in termination on the Interface Board for RS485, Manchester, Biphase, and
SensorNet installations. Refer to Table 4, and Table 10 through Table 13.
11-0768DAV-B/ December 2003
Table 12. J2/J3 Connections for RS485 4-Wire Data
SW1 / SW2 – Position 9 (standard offset)
Position A (1V offset)
Position B (2V offset)
Pin Signal
1 GROUND/SHIELD
2 RS485 OUT -
3 RS485 OUT +
4 +5 VDC BIAS OUT
5 RS485 IN -
6 RS485 IN +
7 TERMINATION – TIE TO PIN 5
8 GROUND
Table 14. J2/J3 Connections for Test Mode Loopback
SW1 / SW2 – Position F
Pin Signal
1 NO CONNECTION
2 TIE TO PIN 5
3 TIE TO PIN 6
4 NO CONNECTION
5 TIE TO PIN 2
6 TIE TO PIN 3
7 NO CONNECTION
8 GROUND
Table of Contents
19