Table of Contents
Advertisement
Headsets
Parameter
Parity
Stop
Flow control
Note
Because Cisco Cius comes preloaded with drivers, Cisco supports only a limited number of cable types.
Cisco recommends using IOGEAR USB-serial adapter.
Use USB console
The USB console cable has a USB interface on one end and a serial interface on the other. The USB interface
may be plugged in to any of the three USB ports on Cisco Cius. The serial interface connects to the serial port
on the PC.
If you do not have a serial port on your PC/laptop, two USB console cables can be connected back to
Tip
back, with a Null modem cable between them.
To use a USB console, use the following procedure.
Procedure
Step 1
In Cisco Unified Communications Manager, set credentials on device page.
Step 2
Enable USB debugging under Product Specific Configuration window.
Step 3
Connect a USB serial cable to Cisco Cius. Cisco Cius console output appears on your terminal screen.
Step 4
After output stops, tap <Return> to sign in.
Step 5
Sign in as default using default password. See
Step 6
After $ prompt screen, you can use tools such as debugsh to diagnose Cisco Cius problems.
For information on troubleshooting the USCB console, see the
Headsets
Although Cisco performs internal testing of third-party headsets for use with Cisco Cius, Cisco does not certify
or support products from headset or handset vendors.
Cisco Cius reduces some background noise that is detected by a headset microphone, but if you want to further
reduce the background noise and improve the overall audio quality, use a noise-canceling headset.
Cisco Cius Administration Guide, Release 9.2(4)
6
Setting
none
1 bit
none
.
Troubleshooting USB
Setting Up Cisco Cius
Console.
OL-27284-01
Advertisement
Table of Contents
