Using External Devices; Video Displays - Cisco Cius Manual

Using External Devices

• Divert/Reject
• Three-way call handling
• Speed dialing
Hands-free devices may differ in how features are activated. Device manufacturers may also use different
terms when referring to the same feature.
For more information, see the manufacturer documentation.
Important Note about Headset Types
Only one headset type works at any given time, so if you have both a Bluetooth headset and an analog headset
attached to the Cisco Cius device, enabling the Bluetooth headset disables the analog headset. To enable the
analog headset, disable the Bluetooth headset.
Using External Devices
Cisco recommends the use of good-quality external devices that are shielded (screened) against unwanted
radio frequency (RF) and audio frequency (AF) signals.
Depending on the quality of these devices and their proximity to other devices such as mobile phones or
two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or
more of the following actions:
• Move the external device away from the source of the RF or AF signals.
• Route the external device cables away from the source of the RF or AF signals.
• Use shielded cables for the external device, or use cables with a better shield and connector.
• Shorten the length of the external device cable.
• Apply ferrites or other such devices on the cables for the external device.
Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external
devices, cables, and connectors. The system performs adequately when suitable devices are attached using
good-quality cables and connectors.
In European Union countries, use only external headsets that are fully compliant with EMC Directive
Caution
89/336/EC.

Video Displays

Cisco Cius supports external display devices through the micro-HDMI port on the bottom of the device.
Connect a monitor to the device by inserting one end of an HDMI cable into the micro-HDMI port and the
other end into a monitor HDMI port. The Cisco Cius media station connects to an external monitor through
a DisplayPort connection.
Cisco Cius Administration Guide, Release 9.2(4)
10
Setting Up Cisco Cius
OL-27284-01