Dell Display Control Open a web browser and enter the display’s IP address (e.g. http://192.168.0.30) in the address bar. The Home page opens and click Crestron for the control interface. The Main window as shown below is displayed. As shown above, you can open a window by clicking the corresponding tab at the top right of the window.
3 Click a button and operate as follows. To show the hidden buttons, click the icons if applicable at the left and right ends. Button Description Contrast Adjusts the contrast setting. Brightness Adjusts the brightness setting. Sharpness Adjusts the sharpness setting. Dell Display Control │...
Assigned the same operation as button. Assigned the same operation as button. Assigned the same operation as button. Assigned the same operation as button. Tools Window Dell C8618QT Room ************** Name ************** ************** ************** ® Configures the settings between the monitor and Crestron control system.
Page 7
The usable symbols are space and the following; !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ Confirm Re-enter the above password for verification. If the password is incorrect, an error message is displayed. To apply the settings, click the [Send] button. Dell Display Control │...
Info window Dell C8618QT Room Name Displays the settings and status of the monitor. Click the [Exit] button to return to the Main window. 1 Monitor Information Item Description Monitor Name Displays the monitor name settings. Location Displays the the location name of the monitor.
Sends/receives messages to/from the administrator for Crestron RoomView Express. Button Description Send Sends a message. Emergency Alert ® When the administrator for Crestron RoomView Express sends out an alert message, it will be displayed on the screen. Dell Display Control │...