Network Update - Philips HTS3106/F7 C Service Manual

Network Update

1. Press [ ] button to display Setup menu.
2. Select Setup - Advanced Setup - Software Update
- Network.
3. When "Yes" is chosen, the screen appears in Fig. p
and the unit starts connecting to the network.
Software Update
Network Connecting...
Fig. p
4. The firmware version confirmation screen (Fig. q)
will appear on the screen. Select "Yes" and press
[OK] button.
Software Update
Current Version : X.XX.XX
Insert Version : X.XX.XX
The latest software can be download. Do you want to download?
No
Fig. q
5. Fig. r will appear on the screen.
Software Update
Please wait for a few minutes. During the updated process the player
will automatically turn off and turn back on.
Fig. r
6. After a few minutes, the power will turn off
automatically.
Yes
1-7-4
7. The power turns on and updating starts
automatically.
Fig. s will appear on the screen and Fig. t will
appear on the VFD.
Software Update
Please wait for a few minutes. Do not unplug the AC cord or interrupt the
updating process. When update is completed unit will automatically turn off,
and unit will automatically turn back on.
Updating Software....
Fig. s
Fig. t
8. After the update, the power turns off and then
turns back on automatically.
Note: The setup setting configured before the update
will be kept.
Network Error Message
No. Error Message
The cable is not connected.
1
Please confirm the connection of the cable.
DHCP cannot be acquired.
2 Please confirm connection or set it with the
manual operation.
Internet Protocol address is not set.
3
Please confirm the set content.
The equipment with same Internet Protocol
4 address already exists.
Please set another Internet Protocol address.
There is no response from Default gateway.
5 Please confirm the address of Default
gateway.
It is not possible to connect to the DNS server.
6 Please confirm the Internet connection or the
DNS address setting.
It is not possible to connect to the server.
7
Please contact our support center.
It is not possible to confirm the software
8 version.
Please contact our support center.
Cannot connect to the wireless network.
9
Please confirm the wireless network setting.
HT3.5(P&F)_(VFD)FW