Av-In - Kenwood DDX795 Instruction Manual

Other External Components Other External Components
You can also display the picture from the rear view
camera manually without shifting the gear to the
reverse (R) position.
On the monitor panel:
DDX795 DDX5018BT
DDX775BH
DDX6018BT
DMX6018BT
DDX595
DDX718WBTL
DDX575BT
DMX718WBTL
On the pop-up short-cut menu: Touch as follows (only
for DDX795/DDX775BH/DDX6018BT/DDX5018BT/
DDX595/DDX575BT/DDX718WBTL):
To display the front view camera screen
(Only for DDX795/DDX775BH/DDX595/DDX575BT/
DDX718WBTL/DMX718WBTL)
• Set [Front Camera] to [ON] on the <Camera>
screen beforehand. (Page 54)
While the rear camera screen is displayed, touch the
area shown below.
(Hold)
• Each time you touch the area, the screen is switched
between rear view camera and front view camera.
To exit the camera screen
Press HOME on the monitor panel or touch the area
shown below.

AV-IN

(Only for DDX6018BT/DMX6018BT/DDX5018BT/
DDX718WBTL/DMX718WBTL)
Connecting an external component
See page 66 for connection terminals.
Starting playback
1
Select "AV-IN" as the source.
On the Home screen, touch as follows:
2
Turn on the connected component and
start playing the source.
• For playback information, see "Source control
screen" on page 10.
ENGLISH 37