Disc - Kenwood DDX795 Instruction Manual

Disc

Disc
(Only for DDX795/DDX775BH/DDX6018BT/DDX5018BT/DDX595/DDX575BT/DDX718WBTL)
• If a disc does not have a disc menu, all tracks on it will
be played repeatedly until you change the source or
eject the disc.
• For playable disc types, file types and other
information, see pages 66 and 67 .
• If " " appears on the screen, the unit cannot accept
the operation you have tried to do.
– In some cases, without showing "
will not be accepted.
• When playing back a multi-channel encoded disc,
the multi-channel signals are downmixed.
Inserting a disc
DDX795/DDX775BH/DDX6018BT/DDX718WBTL:
Press M on the monitor panel to display the <Angle
Adjust> screen, touch [ M DISC EJECT] to open the
monitor panel, then insert a disc.
Label side up
E.g. Inserting a disc for DDX795
• After the disc is loaded, the monitor panel closes
automatically.
DDX5018BT/DDX595/DDX575BT:
", operations
E.g. Inserting a disc for DDX595
The source changes to "DISC" and playback starts.
• The IN indicator lights up while a disc is inserted.
Ejecting a disc
DDX795/DDX775BH/DDX6018BT/DDX718WBTL
Press on the monitor panel.
M
On the <Angle Adjust> screen, then touch as follows:
DDX5018BT/DDX595/DDX575BT:
• When removing a disc, pull it out horizontally.
• You can eject a disc while playing another AV source.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
To close the monitor panel (only for DDX795/
DDX775BH/DDX6018BT/DDX718WBTL):
Label side up
After removing the disc, press
• For playback information, see "Source control screen"
• For key operations on the touch panel, see "Common
1
2
M
on the monitor panel.
Playback operations
Audio playback information and key
operation
on page 10.
operation keys on source control screen" on
page 11.
Selecting a folder/track on the list
Display the folder/track list.
On the source control screen, touch as follows:
Select the item in the selected folder.
• For details about the list operation, see
page 12.
Select an item in each layer until you reach and
select the desired file.
ENGLISH 13