Power By Battery; Installing Or Removing Slide Battery Cartridge; Indicating The Remaining Battery Capacity - Makita XRM08 Instruction Manual

Power by battery

The following table indicates the operating time on a
single charge.
Battery
capacity
1.5Ah
2.0Ah
3.0Ah
4.0Ah
5.0Ah
6.0Ah
Installing or removing slide battery
cartridge (Fig. 3 and 4)
•
To install the battery cartridge, align the tongue on
the battery cartridge with the groove in the housing
and slip it into place. Always insert it all the way until it
locks in place with a little click.
• If you can see the red indicator on the upper side of
the button, it is not locked completely. Install it fully
until the red indicator cannot be seen. If not, it may
accidentally fall out of the tool, causing injury to you or
someone around you.
•
Do not use force when inserting the battery cartridge.
If the cartridge does not slide in easily, it is not being
inserted correctly.
•
To remove the battery cartridge, sliding it from the tool
while pressing the button on the front of the cartridge.
Note:
When the speaker is in low battery, the middle LED
will lash in red.
5
Battery Cartridge Voltage
10.8V
-12Vmax
BL1016
BL1815N
BL1021B
BL1820B
BL1830/
BL1830B
BL1041B
BL1840B
BL1850B
BL1860B
AT SPEAKER OUTPUT = 100mW (unit: Hour)
18V AUX IN
12
9.5
15
13
18
31
25
32
39
Indicating the remaining battery
capacity
Only for battery cartridges with "B" at the end of the
model number
1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps light up for few seconds.
(Approximately)
AUX IN
Bluetooth
+USB(2.1A)
11
9.0
14
12
17
28
24
31
37
1
Bluetooth
+USB(2.1A)
1.0
1.5
1.0
2.0
3.0
2.5
4.0
5.5
6.5
2