Using The Accessories - Zanussi ZOP37912 User Manual

Table of Contents

Advertisement

Available languages

Available languages

To confirm the settings of the clock
functions, press
for an automatic confirmation.
SETTING THE DURATION OR END
1. Set an oven function.
2. Press
again and again until the display
shows
or
.
or
flashes in the display.
3. Press
or
to the set the values and press
to confirm.
For Duration
first you set the minutes and
then the hours, for End
hours and then the minutes.
An acoustic signal sounds for 2 minutes after the
time ends.
or
symbol and time setting flash
in the display. The oven stops.
4. Press any button to stop the acoustic signal.
5. Turn the knob for the oven functions to the off
position.
If you press
hours for DURATION
appliance goes to setting of the END
function.
SETTING THE MINUTE MINDER
1. Press
again and again until
flash in the display.
2. Press
or
to set the MINUTE MINDER.

USING THE ACCESSORIES

WARNING! Refer to Safety chapters.
INSERTING THE ACCESSORIES
Wire shelf:
Push the shelf between the guide bars of the shelf
support and make sure that the feet point down.
or wait 5 seconds
first you set the
when you set the
, the
and "00"
First you set the seconds, then the minutes and
then the hours.
At first, the time is calculated in minutes and
seconds. When the time you set is longer than
60 minutes, the symbol
display.
The appliance now calculates the time in hours and
minutes.
3. The MINUTE MINDER starts automatically after
five seconds.
After 90% of the set time, an acoustic signal
sounds.
4. When the set time ends, an acoustic signal
sounds for two minutes. "00:00" and
the display. Press any button to stop the
acoustic signal.
If you set the MINUTE MINDER when
the DURATION
function operates, the symbol
comes on in the display.
COUNT UP TIMER
Use the Count Up Timer to monitor how long the
oven operates. It is on immediately when the oven
starts to heat.
To reset the Count Up Timer, press and hold
and
. The timer starts to count up again.
The Count Up Timer cannot be used
with the functions: Duration
.
Deep pan:
Push the deep pan between the guide bars of the
shelf support.
comes on in the
flash in
or END
, End
9

Advertisement

Table of Contents
loading

Table of Contents