Casio I/O-PB-12 Service Manual page 18

2. NET END
To quit Network and Network controller and stop the token.
u_ioctrl ( end ) ret = 0000
3. SEND/RECV MODE (Connection)
To repeat In-line communication. ( 1 to 1)
In case of communication error, Going to retry 10 times at every 0.5 second.
Ensure that install the program No.1 before using this operation.
Send to ( Target ECR Number ):__
n_mk_socket ret = 0000
n_bind ret = 0000
n_open ret = 0300
HIT RETURN KEY TO GO NEXT
n_write ( Loop = 0001 )
Blinking n_write and n_read.
n_close ret = 0000
n_del_sckt ret = 0000
4. RECV/SEND MODE (Connection)
To repeat In-line communication. ( 1 to 1)
In case of communication error, Going to retry 10 times at every 0.5 second.
Ensure that install the program No.1 before using this operation.
Recv from ? ( Target ECR Number ):__
n_mk_socket ret = 0000
n_bind ret = 0000
n_open ret = 0300
HIT RETURN KEY TO GO NEXT
n_read ( Loop = 0001 )
Blinking n_write and n_read.
n_close ret = 0000
n_del_sckt ret = 0000
Input the ECR ID and press Enter.
ECR side: After setting ID and BPS speed.
Press Enter.
Counting up the number of packet.
Press Esc.
Input the ECR ID and press Enter.
ECR side: After setting ID and
Press Enter.
Counting up the number of packet.
Press Esc.
— 16 —
Then input 840<#2>.
BPS speed. Then input 830<#2>.