Advertisement
Step 6 To test if your selections are suitable ones for your DMP
display, click Show IP in the DMP Mode area.
Your DMP display should show a Cisco logo and should
show the IP address for your DMP.
Step 7 To make your configuration changes permanent, even
after you restart your DMP, do the following:
a.
Select Administration > Save Configuration.
b.
On the Save Configuration page, click Save.
10
Setting Up Centralized
Management
If your DMP will be managed centrally as part of a digital signage
network, you must configure DMPDM and DMM-DSM to work
together.
24
Advertisement
