Advertisement
Step 3 Connect to a 120V–240V AC electrical outlet that you
know is grounded.
To protect your DMP from electrical surges, we recommend that
you use a surge protector or an uninterruptable power supply from
a reputable manufacturer.
7
Checking the LEDs
The DMP chassis contains a green LED and a red LED. After you
attach your DMP to its AC power source, you should see light
from both LEDs through the DMP front grille.
The LEDs tell you if your DMP has power and if it has obtained an
IP address.
• A solid green LED indicates that a power source is available.
• A solid red LED indicates that your DMP is trying to obtain an
IP address. After your DMP has an IP address, it turns off the
red LED.
The LEDs do not blink ordinarily but might do so if your DMP is
exposed to interference from an infrared signal.
14
Advertisement
