How To Communication Using Udp - Honeywell RMWIFI-M3 User Manual

RAE Systems by Honeywell

8. How to communication using UDP:

Firstly, use socket tool to create UDP socket which listen on local
port 4023, remote communication node IP: 192.168.1.99, port:
6000, see following picture for detail:
8.1 Receive data packet from UDP server:
1. In order to receive data packet from remote using UDP protocol,
communication via UDP, RMWIFI will need to listen on local port:
6000.
Host command:
7B 41 00 08 74 1D 00 17 70 FF FF 7D
RMWIFI_M3 response:
7B 41 00 07 75 1D 00 00 C3 F0 7D
Example communication sequence:
Copyright © 2015 Honeywell Analytics, All rights reserved.
Honeywell Confidential and Proprietary
Revision –1.0
Page 23 of 29