Initialization - Honeywell RMWIFI-M3 User Manual

RAE Systems by Honeywell
Then power-off and power on the EVB, RMWIFI modem application
firmware will run and output information as following picture via
EVB's RS232 interface:

5. Initialization:

5.1 Get module type:
Host command:
7B 41 00 06 74 2E 00 FF FF 7D
RMWIFI response:
7B 41 00 07 75 2E 00 00 3F F3 7D
Example communication sequence:
Copyright © 2015 Honeywell Analytics, All rights reserved.
Honeywell Confidential and Proprietary
Revision –1.0
Page 10 of 29