How To Communicate Using Tcp - Honeywell RMWIFI-M3 User Manual

RAE Systems by Honeywell
for seconds and indicates whether it associates with AP
successfully. Check the red byte of the response command, 0x00
indicates that it has associated with AP successfully.
Example communication sequence:

7. How to communicate using TCP:

7.1 Connect to TCP server:
1. Use the socket test tool, create a TCP server as following picture,
the TCP listen port is 9723:
Copyright © 2015 Honeywell Analytics, All rights reserved.
Honeywell Confidential and Proprietary
Revision –1.0
Page 17 of 29