Cisco ASR 903 Installation Instructions Manual page 29

Installing the Cisco ASR 903 Router as a Satellite Shelf
• EIA 19-inch rack—Attach the grounding lug to the rear of the router, as shown in this figure.
Figure 9: Attaching a Grounding Lug to the Rear of the Router
1
• 300-mm ETSI cabinet—Attach the grounding lug on the rack-mount bracket on the front of the router,
as shown in this figure.
Figure 10: Attaching a Grounding Lug to the Rack-Mount Bracket
1
To ensure that the chassis ground connection that you provide is adequate, you need the following parts and
tools:
• Ratcheting torque screwdriver with Phillips head that exerts up to 15 lbf/sq in. of pressure for attaching
the ground wire to the router
• Crimping tool as specified by the ground lug manufacturer
Cisco ASR 9000 Series Aggregation Services Router Satellite Systems Installation Guide
Installing the Chassis Ground Connection
Grounding lug (19-inch EIA rack)
Grounding lug (3000-mm ETSI cabinet)
29