Washing With Standard Settings - Bosch Axxis+ WFR 2460 Operating, Care And Installation Instructions Manual

Washing with
Standard Settings
The specified standard settings are optimally
adjusted to the selected program.
If you do not want to change these standard
settings:
q Turn on the water taps.
q Turn the program selector to the desired
program.
i If the time has not been set, Clock not set" is
briefly indicated in the display field; 0:00"
flashes.
Set clock; see from Page 24.
q Load the washing machine and close the door.
The Start/Pause indicator light flashes (red).
16
q If required, press the button(s) for additional
option(s).
The indicator light of the selected button shines
(red).
i If an illogical combination was selected
inadvertently, the indicator light of the selected
button is turned off and a signal is emitted.
q Press the Start/Pause button.
The indicator light shines (red). The program
starts.
i The individual program steps are indicated in
the display field.
Washing with individual settings is described
subsequently.