General Safety Rules - RIDGID NaviTrack Operator's Manual

Safety Symbols
In this operator's manual and on the product, safety symbols and signal words are used to communicate important safety
information� This section is provided to improve understanding of these signal words and symbols�
This is the safety alert symbol� It is used to alert you to potential personal injury hazards� Obey all safety messages that follow
this symbol to avoid possible injury or death�
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury�
DANGER
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury�
WARNING
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury�
CAUTION
NOTICE
NOTICE indicates information that relates to the protection of property�
This symbol means read the operator's manual carefully before using the equipment� The operator's manual contains important
information on the safe and proper operation of the equipment�
This symbol means always wear safety glasses with side shields or goggles when handling or using this equipment to reduce
the risk of eye injury�
This symbol indicates the risk of electrical shock�

General Safety Rules

WARNING
Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock,
fire, and/or serious injury.
SAVE THESE INSTRUCTIONS!
Work Area Safety
•
Keep your work area clean and well lit. Cluttered or
dark areas invite accidents�
•
Do not operate equipment in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Equipment can create sparks which may ignite
the dust or fumes�
•
Keep children and bystanders away while operating
equipment. Distractions can cause you to lose control�
Electrical Safety
•
Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges, and refrigera-
tors. There is an increased risk of electrical shock if your
body is earthed or grounded�
•
Do not expose equipment to rain or wet conditions.
Water entering equipment will increase the risk of elec‑
trical shock�
•
Do not abuse the cord. Never use the cord for carrying,
pulling, or unplugging the power tool� Keep cord away
from heat, oil, sharp edges, and moving parts� Damaged
or entangled cords increase the risk of electric shock�
•
If operating equipment in a damp location is unavoid-
able, use a ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI reduces the risk of
electric shock�
•
Keep all electrical connections dry and off the
ground. Do not touch equipment or plugs with wet
hands to reduce the risk of electrical shock�
Personal Safety
•
Stay alert, watch what you are doing, and use com-
mon sense when operating equipment. Do not use
equipment while you are tired or under the influence of
drugs, alcohol, or medication� A moment of inattention
while operating equipment may result in serious person‑
al injury�
•
Use personal protective equipment. Always wear eye
protection� The appropriate use of protective equipment
such as a dust mask, non‑skid safety shoes, a hard hat,
and hearing protection will reduce personal injuries�
•
Do not overreach. Keep proper footing and balance at
all times� This enables better control of the equipment in
unexpected situations�
•
Dress properly. Do not wear loose clothing or jewel‑
ry� Keep your hair, clothing, and gloves away from mov‑
ing parts� Loose clothes, jewelry, and long hair can be
caught in moving parts�
Equipment Use and Care
•
Do not force equipment. Use the correct equipment for
your application� The correct equipment will do the job
better and safer at the rate for which it is designed�
•
Do not use equipment if the power switch does not
turn it ON and OFF. Any equipment that cannot be con‑
trolled with the power switch is dangerous and must be
repaired�
TM
English – 3