Quick Setup - Panasonic KX-NCP500 Features Manual

2.3.4 Quick Setup

2.3.4 Quick Setup
Description
It is possible to set up the basic PBX parameters using a PC. When a PC accesses the PBX for the first time
with the Installer Level Programmer Code (® 2.3.1 PC Programming), Quick Setup display will appear
automatically. The following items can be programmed as desired:
Item
Date & Time
System Password
Manager Extension
and Operator
Flexible
Numbering
—Feature
Flexible
Numbering
—Extension
Flexible
Numbering
—Operator
Flexible
Numbering—CO
Access
DTMF/Pulse
Dialling
*1
444 Feature Guide
Parameter
Year/Month/Date/Hour/
Minute
4–10 characters
Extension Number
1.
Type 1
(with )
2.
Type 2
(without )
KX-NCP500/KX-NCP1000/
KX-TDE100/KX-TDE200:
from 101/from 201
KX-TDE600:
from 1001/from 2001
0/9
0/1/9
Pulse/DTMF
Description
The date and time set on the PC will be used.
Enter the system password for installer (®
2.3.3 Password Security).
Assign an extension as a manager extension (®
2.2.6 Manager Features) and an extension as a PBX
operator (® 2.2.5 Operator Features).
If "Type 1 (with )" is selected, " " must prefix all
feature numbers (except access numbers) when an
extension user wants to use a feature.
[Example] Call Pickup feature number
Type 1 (with ): 41
Type 2 (without ): 41
For default of the flexible numbers, refer to the
[Flexible Numbering Table (available while a dial
tone is heard)] (® 2.3.6 Flexible Numbering/Fixed
Numbering).
Determines the number from which default
extension numbers begin.
The feature number for Operator Call can be
selected.
The feature number for Idle Line Access can be
selected.
Determines whether DTMF or pulse dialling is used
on analogue trunk lines by default.