Set-Up And Operation; Unpacking And Inspection - AEG Protect C.3000 Operating Instructions Manual

4. SET-UP AND OPERATION

4.1

UNPACKING AND INSPECTION

The device has been fully tested and inspected. Although the device has
been packed and shipped with the usual degree of care, damage during
transport cannot be ruled out completely.
Claims for damage during transport must always be made with the
transport company!
Check the shipping container for damage on arrival. If necessary, ask
the transport company to check the goods and make a record of the
damage in the presence of the member of staff from the transport
company. Don't turn on the unit and register the damage with the AEG
representative or dealer immediately.
Check the contents of the shipment for completeness:
PROTECT C with 1000, 2000 or 3000 VA

Mains connection cable with safety plug

2 device connecting cables (10 A)

(when C.3000 1x10 A and 1x16 A)
USB communication line

Management Software "CompuWatch" on CD

Operating Instructions

External battery modules includes:
External battery pack

Special battery connection cable

Please contact our hotline (see page 69) in case of any discrepancy.
The original packaging provides effective protection against
mechanical shocks and should be retained so the unit can be
transported safely later on.
83