Panasonic KX-NS1000 Programming Manual page 1085

10M-Half: 10 Mbps/half duplex
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Advanced Settings
WAN Port—MDI/MDIX
Specifies the cable type connected to the WAN port.
Value Range
Auto, MDI, MDIX
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Advanced Settings
WAN Port—Uplink
Specifies whether the WAN port data uplink is enabled.
Value Range
Enable, Disable
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Advanced Settings
Maintenance Port—Speed & Duplex
Specifies the connection mode of the maintenance port. The connection is made in 100Mbps/half duplex when
Auto negotiation fails. This setting is available at Installer level only.
Value Range
Auto: Automatic mode selection
1000M-Full: 1000 Mbps/full duplex
100M-Full: 100 Mbps/full duplex
100M-Half: 100 Mbps/half duplex
10M-Full: 10 Mbps/full duplex
10M-Half: 10 Mbps/half duplex
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Advanced Settings
Port Mirroring—Packet kind for mirroring
Specifies the types of packets used for port mirroring. This setting is available at Installer level only.
Value Range
Disable
LAN (All packets)
28.1 Network Service—[1] IP Address/Ports
PC Programming Manual 1085