Table of Contents
Advertisement
(Module Identifier=MID and Source Address =
SA) and full module description.
Select Module
J1587 Modules
Engine #1
Transmission
Brakes, Power Unit
J1939 Modules
Engine #1
Transmission #1
J1587 MID: 128 Engine #1
3.
Observe while the scan tool validates PID MAP.
•
PID MAP validation is the tool asking the vehicle
which PIDs are supported. Refer to "9
Appendix B—Glossary" on page 44 for abbre-
viations.
View Entire List
View Entire List shows all supported PID data for the
vehicle being tested.
From Select Data to View menu:
1.
Select Entire Data List.
•
Use the
UP and
Data List is highlighted.
•
Press
.
Select Data to View
Entire Data List
Custom Data List
Long PID Names
English/Metric
2.
View PIDs on scan tool.
•
Use the
UP and
•
Refer to "9
Appendix B—Glossary" on page
44.
Eng ECU Temp(°F)
Est Perc Fan Spd(%)
EGR Valve #1 Pos(%)
PctAccelPedalPos3(%)
Throt Pos (%)
Eng Intercool Temp(°F)
Road Spd
(mph)
Pct Eng Load (%)
Eng Clnt Temp(°F)
Brake Sys AirPressEmg
Brake Sys AirPressPri
Brake Sys AirPressSec
ENGINE ECU TEMPERATURE
If Long PID Names is turned ON, the expanded text for
the PID will scroll on the bottom line of display. Refer to
"Long PID Names" on page 13.
If the
icon displays while a PID is selected, press
to select PIDs to graph. A maximum of 2 PIDs can
be graphed.
Bosch Automotive Service Solutions Inc.
HDS 200 HD Scan Tool for Class 4-8 Diesel, Light and Medium Vehicles | User guide | 23 | en
DOWN keys until Entire
DOWN keys.
67.50
29.60
37.50
15.20
31.20
86.00
34.01
45.50
86.00
ON
OFF
OFF
Select PIDs to Graph
✓
Eng ECU Temp(°F)
Est Perc Fan Spd(%)
EGR Valve #1 Pos(%)
PctAccelPedalPos3(%)
Throt Pos (%)
Eng Intercool Temp(°F)
Road Spd
(mph)
Pct Eng Load (%)
Eng Clnt Temp(°F)
Brake Sys AirPressEmg
Brake Sys AirPressPri
Brake Sys AirPressSec
ENGINE ECU TEMPERATURE
•
Use the
RIGHT arrow key to select/deselect
✓Eng ECU Temp(°F)
PIDs. The highlighted PID from when
Est Perc Fan Spd(%)
EGR Valve #1 Pos(%)
pressed is already selected
PctAccelPedalPos3(%)
Throt Pos (%)
•
Use the
LEFT arrow key to deselect all PIDs.
Eng Intercool Temp(°F)
•
Press
to view graph of selected PIDs.
Road Spd (mph)
Pct Eng Load (%)
•
When graphing two PIDs, use the
Eng Clnt Temp(°F)
Brake Sys AirPressEmg
DOWN keys to highlight the desired PID, which
will also display the appropriate scale.
•
Press the
key to pause the graph. Press
the
key again to continue graphing.
•
If the
icon displays while a PID is selected
press
to view graph.
3.
Return to PID screen.
•
Press
.
4.
Return to Select Data to View menu.
•
Press
.
5.
Return to Heavy Duty Standard menu.
•
Press
.
Custom List Select
The Custom Data List allows certain PIDs from the View
Entire Data List, such as those PIDs that apply to a
specific driveability symptom or system, to be selected.
From Select Data to View menu:
1.
Select Custom List Select.
•
Use the
UP and
Data List is highlighted.
•
Press
.
Select Data to View
Entire Data List
Custom Data List
Long PID Names
English/Metric
2.
Select View Instructions or Not.
•
Use the
LEFT and
•
Press
.
was
UP and
DOWN keys until Custom
RIGHT keys.
581618 | REV. A | 11.2017
Advertisement
Table of Contents
