Lock Up Reader - AEG ARE H9 HF User Manual

6.5.6 Interface RS232 **)
If the ARE H9 HF Rs232 is used on a PC a RS232-crossover (lines Rxd, Txd
are crossed) is necessary.
In operation mode "Database/Ser." and "online" are the following
communication settings in use:
9600 baud, 8 data bits, no party bit, one stop bit, no hardware handshake

6.6 Lock up reader

When lock up reader is activated the ARE H9 HF switches of immediately. After
switching on the pocked reader again it shows that it is locked.
During the ARE H9 HF is locked neither a reading process could started nor the
menu could be accessed.
While it is not unlocked, it will switch off again after 5 (default) seconds no
button is pressed.
To leave this mode press both arrow buttons simultaneously.
Unlock Reader !
---------------------------------------------------------------25/51---------------------------------------
Press Both
**)
only in Rs232 version