Set Attribute - AEG ARE H9 HF User Manual

6.3 Set Attribute

With "Set Attribute" one of 27 attributes could be selected for the next read
transponder.
The selection is done by the left/right arrow buttons and confirmed by pressing
the main button.
Set Attribute
In standard read mode this selected attribute will be stored together with the
transponder ID-code of the next read transponder in the internal database of the
ARE H9 HF.
Example of Transponder-ID with no attribute:
4C8C8415
ISO-14443A
type of transponder
In the initial configuration all the 27 attributes available have a standard text
assignment.
#, A, B, C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z
With a PC-software and using the Database/PC mode of the ARE H9 HF it is possible
to assign each attribute a custom text with up to 14 ASCII characters.
Example:
A becomes "stable",
B becomes "pasture"
C becomes "vaccination"
Under "Set Attribute" at the ARE H9 HF it is now possible to select the attribute by
this custom text.
---------------------------------------------------------------13/51---------------------------------------
#
ID
#
attribute