Orientation With Ferrite Antenna - AEG ARE H9 HF User Manual

4.2 Orientation with ferrite antenna

The following diagram shows the typical area where a card transponder should
be read:
5 Database
When a reading had been accomplished successfully, in the standard operating
mode, the ARE H9 HF internal database will be checked whether this transponder
code is already stored.
If the new code, in combination with the attribute, is not found in the database, it
will be stored as a new record. This record is composed of the ID-code, the
transponder type and the selected attribute. With the optional real time clock
module date and time of reading will be also stored.
If the new code is already stored in the database, it will be not stored again. In this
case the reader emits 2 successive beeps.
The database is capable to store up to 2016 transponder codes. When the
maximum of the storage is reached no further new code is stored. To store new
codes in this case the database has to be erased.
On Power Loss the ARE H9 HF will keep its database data.
The database of the ARE H9 HF with all its actual records could be transmitted
to a PC. This is done in the Database/USB mode.
---------------------------------------------------------------10/51---------------------------------------