Change The Admin Password; Reboot The Cable Modem - NETGEAR CM400 User Manual

• Description. A description of the event log entry.
5. To refresh the log page, click the Refresh button.
6. To clear the log entries, click the Clear Log button.

Change the admin Password

You can change the default password that is used to log in to the cable modem with the user
name admin.
To change the password for the user name admin:

1. Launch a web browser from a computer that is attached over an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached over an
Ethernet cable to the cable modem.
2. Type http://192.168.100.1.
A login page displays.
3. Enter the cable modem user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Type the old password.
6. Type the new password in the Set Password field.
7. Type the new password in the Repeat New Password field.
8. Click the Apply button.
Your change takes effect.

Reboot the Cable Modem

Rebooting the cable modem disconnects all computers from the cable modem's local area
network (LAN). After the cable modem is finished booting and reestablishes a connection
with the cable provider's network, the devices reconnect to the cable modem's LAN.
To reboot the cable modem:

1. Launch a web browser from a computer that is attached over an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached over an
Ethernet cable to the cable modem.
2. Type http://192.168.100.1.
A login page displays.
CM400 High Speed Cable Modem
Manage and Monitor
17