Log In To The Cable Modem; Specify The Cable Connection Starting Frequency - NETGEAR CM400 User Manual

Log In to the Cable Modem

After you set up the cable modem, you do not need to log in to the cable modem for normal
operation.
To log in to the cable modem, you must use a web browser such as Microsoft Internet
Explorer 5.0 or later, Firefox Mozilla 2.0 or later, Safari 1.4 or later, or Google Chrome 11.0 or
later.
To log in to the cable modem:

1. Launch a web browser from a computer that is attached over an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached over an
Ethernet cable to the cable modem.
2. Type http://192.168.100.1.
A login page displays.
3. Enter the cable modem user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.

Specify the Cable Connection Starting Frequency

The starting frequency for the cable connection is automatically generated. For most Internet
connections, you do not need to specify this information. If you need to enter a starting
frequency, contact your Internet provider.
To change the starting frequency:

1. Launch a web browser from a computer that is attached over an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached over an
Ethernet cable to the cable modem.
2. Type http://192.168.100.1.
A login page displays.
3. Enter the cable modem user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
The Cable Connection page displays.
5. In the Starting Frequency field, type a number.
CM400 High Speed Cable Modem
Manage and Monitor
14