Associated Commands - Cisco ASR 900 Series Configuration Manual

Associated Commands

mode t3
controller T3 0/4/12
framing c-bit
cablelength 224
t1 1 cem-group 0 unframed
t1 1 clock source recovered 1
interface CEM 0/4/12
no ip address
cem 0
rtp-present
Use the show running-config | section recovered-clock command to verify the recovery of differential clock
of channelized T3/T1 interfaces:
Router# show running-config | section recovered-clock
recovered-clock 0 0
clock recovered 1 differential cem 1 0

Associated Commands

The commands used to configure adaptive clock recovery and differential clock recovery are:
Commands
clock recovered adaptive cem
clock recovered differential cem
cem-group
recovered-clock
controller t1/e1
clock-source
network-clock input-source
1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco
IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
50
Clock Recovery System for SAToP
URL
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c2.html#wp8894393830
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c2.html#wp8894393830
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c1.html#wp2440628600
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-o1.html#wp8262293900
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c2.html#wp1472647421
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c2.html#wp6081785140
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/ir-l2.html